Notice: Function _load_textdomain_just_in_time was called incorrectly. Translation loading for the wordpress-seo domain was triggered too early. This is usually an indicator for some code in the plugin or theme running too early. Translations should be loaded at the init action or later. Please see Debugging in WordPress for more information. (This message was added in version 6.7.0.) in /var/www/html/wp-includes/functions.php on line 6260 Revitalizing Clarity Shampoo - Happi

Revitalizing Clarity Shampoo

Revitalizing Clarity Shampoo
Ingredients
%

Phase A

  • Deionized water
  • 46.43
  • Elfacos GT 282S (AkzoNobel) (Ceteareth-60 myristyl glycol)
  • 3.00
  • Elfan AT 84 G (80% active) (AzkoNobel) (Sodium cocoyl isethionate)
  • 1.50
  • Standapol ES-2 (25% active) (BASF) (Sodium laureth sulfate)
  • 15.00
  • AE Sulfosuccinate (DLSS-30) (Sun Chemical) (Disodium lauryl ether sulfosuccinate)
  • 15.00
  • Crodateric CAB 30 (30% active) (Croda) (Cocamidopropyl betaine)
  • 10.00
  • Flexan II polymer (AkzoNobel) (Sodium polystyrene sulfonate)
  • 1.00
  • Hydrovance (AkzoNobel) (50% solids) (Hydroxyethyl urea)
  • 2.50
  • Glycerin (Jeen)
  • 2.50
  • Ethyl lactate (Shanghai Rongbai Biotechnology Co.)
  • 0.25
  • Tri-sodium citrate dihydrate (Kraft Chemical)
  • 0.05
  • Citric acid (Sigma-Aldrich)
  • 0.02
  • Dissolvine GL-47-S chelate (47% active) (AkzoNobel) (Tetrasodium glutamate diacetate)
  • 0.25
  • Euxyl PE 9010 (Schulke & Mayr) (Phenoxyethanol (and) ethylhexylglycerin)
  • 0.50
  • Sodium chloride (Fisher Scientific)
  • 1.75
  • Sodium hydroxide (25% solution) (Ricca Chemical)
  • 0.25

Procedure

Add water to an appropriate vessel and begin mixing with an overhead mixer. With rapid mixing, add Elfacos GT 282S and heat to 75°C until fully dissolved. Cool batch to 50°C and add the Elfan AT 84 G surfactant, mixing thoroughly. Add Standapol ES-2, AE Sulfosuccinate, and Crodateric CAB 30, mixing well between each addition. Add Flexan II polymer slowly and allow to fully disperse. Add next 8 ingredients in order, with mixing. Adjust pH to 5.0 to 6.0 with sodium hydroxide solution.

Properties

pH—5.0–6.0; Viscosity—7,000 – 11,000 cPs Brookfield RV 4 @ 10 rpm (measured after 1 minute); Appearance—Clear.

More Information

AkzoNobel 800-906-9977 Email: personalcare.usa@akzonobel.com Website: www.akzonobel.com/personal care